Walton Water Purifier RO + UV

Walton Water Purifier RO + UV (model WWP-W6RUAH) is a Reverse Osmosis Water Purifier that runs water through 5 stages and finishes with UV sterilization. The RO membrane takes out dissolved solids and heavy contaminants, and the UV stage deals with what filtration alone cannot — the microbiological load. Together they are what the specification sheet calls maximum protection.

Output is rated at 75 GPD, and the unit needs a water inlet pressure between 0.1 and 0.4 MPa, which an ordinary household supply line usually provides. A built-in 4 litre tank keeps purified water available during a power outage, and auto flash of the RO membrane helps extend membrane lifespan instead of letting deposits build up.

As a Hot and Cold Water Purifier, this model has built-in heating and cooling managed by an automatic control unit, so you are not adjusting anything by hand between a cup of tea and a glass of chilled water. A child safety lock guards the hot outlet, and the front carries an elegant glass panel.

Electrically this RO + UV Water Purifier runs on 220~240V, 50Hz with a total rated power of 610W, split as 40W for purification, 500W for heating and 70W for cooling. It weighs 11.70 kg net and 12.90 kg gross, is built for easy maintenance, and keeps the running cost of water purification low.

Highlights

• Reverse Osmosis System with 5 stages + UV sterilization
• RO membrane + UV sterilization for maximum protection
• Purification rate 75 GPD
• Built-in 4L water tank for pure water during an electric outage
• Built-in heating and cooling feature
• Automatic heating and cooling control unit for easy control
• Child safety lock for protection
• Auto flash of RO membrane to improve membrane lifespan
• Elegant front glass design
• Water inlet pressure 0.1 – 0.4 MPa
• 220~240V, 50Hz, total rated power 610W
• Net weight 11.70 kg, gross weight 12.90 kg
• Easy maintenance with low running cost for water purification

Warranty Information

• Main Parts: 12 Months
• Spare Parts: 12 Months
• After Sales Service: 12 Months

Important Usage Instructions

• Connect the inlet to a supply that holds 0.1–0.4 MPa pressure; below that range the RO membrane will not produce its rated 75 GPD.
• Place the unit on a level, dry surface near an earthed 220~240V socket and away from direct sunlight or a heat source.
• Change the filter cartridges and the UV lamp on schedule — a spent UV lamp still glows in some units but no longer sterilises.
• Keep the child safety lock engaged, since the heating side dispenses water hot enough to scald.
• Do not run the purifier when the supply line is dry, and drain the 4 litre tank if you are leaving the unit unused for a long period.